I'm having trouble getting enough sensitivity out of my pads. I have set the threshold and gain to very sensitive settings however, they are still not able to pick up every stroke of my drum rolls. I am using Native Instruments Battery and EXS24 for samples. Is there another program out there that will give me more sensitivity with from my pads?
michael
sensitivity issues...
Moderator: Related software moderators
2 posts
• Page 1 of 1
sensitivity issues...
by beatzbounce321 » Sun Feb 21, 2010 9:53 pm
- beatzbounce321
- Posts: 17
- Joined: Fri Dec 11, 2009 9:21 am
Re: sensitivity issues...
by macca2004 » Fri May 14, 2010 9:22 pm
theres more to sensitivity than threshold and gain..
Make sure high level is set correctly.
Make sure your retrigger and dyntime/levels settings are at their optimum..then you need to set the correct curve.
As light touches are not recognised use log1-log4...
You can also use the custom curves option to improve playability even more
Make sure high level is set correctly.
Make sure your retrigger and dyntime/levels settings are at their optimum..then you need to set the correct curve.
As light touches are not recognised use log1-log4...
You can also use the custom curves option to improve playability even more
- macca2004
- Posts: 80
- Joined: Wed Dec 10, 2008 6:54 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 31 guests