www.megadrum.info

Posted: **Thu Apr 19, 2012 2:27 am**

HI, there.

I have own one of your 32 Inputs Megadrum, Atmega644 based at 20MHz, you have build to me (Thanks by the way Dimitri).

My megadrum dates is from July 2010 i have loaded the last firmware megadrum_20120415.

But, now i just have realised that from 11 input to 17 My megadrum is not receiving hits or data. 1-10 inputs are working normally.

I wish you can help me. Maybe i am doing something wrong.

Thanks in adavance.

Posted: **Thu Apr 19, 2012 10:14 am**

From http://www.megadrum.info/content/miscellaneous-settings :

Next screen is MaxInputs:

<MaxInputs >
< 56 >

Here you can set the maximum number of inputs used. The lower the MaxInputs the more Configs/DrumMaps you can save in non-volatile memory but it will limit you to the number of inputs set here. When you change MaxInputs to a new number don't try to load Configs/Drum Maps saved previously - it can cause MegaDrum to misbehave.
This is a Global setting so when you change this setting it is only saved in no-volatile (EEPROM) memory when you exit the Menu. So, as a consequence, if you change it and switch MegaDrum off straight away to test it without exiting the Menu, it will revert to a previous state before the change.

Posted: **Thu Apr 19, 2012 6:10 pm**

Scroll to menu voice " Max Inputs" and raise the number of your input

Posted: **Fri Apr 20, 2012 3:19 am**

Ok, thank you so much.

www.megadrum.info

Dimitri´s Megadrum 32, some Inputs are Not respoonding

Dimitri´s Megadrum 32, some Inputs are Not respoonding

Re: Dimitri´s Megadrum 32, some Inputs are Not respoonding

Re: Dimitri´s Megadrum 32, some Inputs are Not respoonding

Re: Dimitri´s Megadrum 32, some Inputs are Not respoonding