www.megadrum.info

Hellò guys

i see in the web more foam cone to put to mesh head and the piezo, but are expensive!

Is possible built (home-made) a good cone with good response of sensivity and economic?

if it's possible i would like a pictures and the list of material required

sorry for my english

Thanks

I recommend you to visit the forum of vdrums.com and it's DIY section. Make a search there and you will get lot's of info on the topic:
http://www.vdrums.com/forum/forumdisplay.php?f=48
Good luck!

thanks!

and sorry you know a good place or site web for buy a good foam cone?

thanks

Here's one, you can get as many as you want from this guy. Only seems to sell them with the triggers on them though.

very thanks!

Has anyone tried these?

http://cgi.ebay.it/5-foam-cone-trigger- ... 3f01b16cde

You can order (replacement) Roland cones at your local outlet for an equivalent price to those mentioned above.

Maylord.war wrote:Has anyone tried these?

http://cgi.ebay.it/5-foam-cone-trigger- ... 3f01b16cde

I am doing a DIY project with his "enhanced cones", and initial testing with a DTXTreme III has yielded very positive results. Build quality is excellent!

hi!

very good! and what material you use?

if you have some pictures please post in this topic!

Ken Forgettable wrote:You can order (replacement) Roland cones at your local outlet for an equivalent price to those mentioned above.

Hi ken Forgettable

I contacted the importer of Italian Roland

but told me that is possible buy only 2 cones because they are "special parts" intended only for service centers and not for users.

However, the price is 28 euros including shipping for only 2 cones of TD20 pad ... some solution?

The foam cone on ebay are good? what suggest?

very thanks and sorry for my english