www.megadrum.info

by **anirudh.pianist** » Mon Jun 13, 2011 2:15 am

I din get u...can u plz tell the resistor names..Wat is the purpose of hi hat toggle switch...wat does it do?and where is the main power switch connector on the board?

by **dmitri** » Mon Jun 13, 2011 9:07 am

anirudh.pianist wrote:I din get u...can u plz tell the resistor names..Wat is the purpose of hi hat toggle switch...wat does it do?and where is the main power switch connector on the board?

Seeing all your questions I have to say that you don't have enough electronic skills to build MegaDrum yourself. You should start your electronics projects with something more simple.

by **anirudh.pianist** » Mon Jun 13, 2011 10:57 am

Le nan magney Wher is main power switch to the main board/?
Bye,
Ani

by **dmitri** » Mon Jun 13, 2011 11:36 am

There is no power switch.

by **anirudh.pianist** » Mon Jun 13, 2011 4:39 pm

R ther any alternative for 4851.i dont get it here in india

???

by **dmitri** » Mon Jun 13, 2011 4:41 pm

anirudh.pianist wrote:R ther any alternative for 4851.i dont get it here in india ???

4051 with bat85 diodes.

by **anirudh.pianist** » Mon Jun 13, 2011 4:45 pm

ok fine but ur project is the ruling 1 against synthex rite?so wat do u recommend synthex or ur boards..plz help im damn confused..

by **dmitri** » Mon Jun 13, 2011 7:46 pm

anirudh.pianist wrote:ok fine but ur project is the ruling 1 against synthex rite?

I didn't understand the question.

so wat do u recommend synthex or ur boards..plz help im damn confused..

Latest MegaDrum schematics. 32 inputs. But no matter which PCB you choose I'm afraid you will have big problems making it work and you will get frustrated having wasted your time. I recommend you to start with a much more simple DIY project, e.g. http://www.sparkfun.com/products/10212

by **anirudh.pianist** » Tue Jun 14, 2011 12:10 am

Do not worry I will get help from engineering ppl around...In ur board ICSP is for Atmega32 Or PIC18F2550?Plz do ur part of help then i can do it....

plz tell me on how can i get my atmega32 bootloaded by myself..this is ma skool project i hav to submit it by day after tomorrow...i hav a programmer for my atmega32...IM DOING UR BOARD ONLY...

by **dmitri** » Tue Jun 14, 2011 9:08 am

anirudh.pianist wrote:Do not worry I will get help from engineering ppl around...In ur board ICSP is for Atmega32 Or PIC18F2550?

ISP and ICSP are clearly marked in the schematics.

Plz do ur part of help then i can do it.... plz tell me on how can i get my atmega32 bootloaded by myself..this is ma skool project i hav to submit it by day after tomorrow...i hav a programmer for my atmega32...IM DOING UR BOARD ONLY...

You keep asking the same question over and over again. The answer is also the same:

You cannot program the protected bootloader yourself!

www.megadrum.info

Help

Re: Help

Re: Help

Re: Help

Re: Help

Re: Help

Re: Help

Re: Help

Re: Help

Re: Help

Re: Help

Who is online